Here are 3 simple ways to attach to the wall easily, efficiently, even without punching.
1. With plug-in plug
If you want to attach a bookcase to your wall, a shelf and even your own construction that has some weight, what you will need are the appropriate plug-in plugs.
There are different oopat plugs for any type of surface such as cement, wood, drywall or coke brick.
Depending on the surface you want, you may need a drill to make the holes to place the dowels with the corresponding plugs.
Remember that the heavier the object you want to hang, the thicker the diameter of the
plug you will choose. See here plugs - plugs To complete the hanging of your frame, all you need is a hammer to nail them. nails on the surface.
2. With nail If you regret and want to change your position on the table just used a little stucco and covered the hole or hung a larger frame in its old place.
If you want to fastenings canvases, frames frames clocks or decorations which generally are not very heavy weight the solution is the nails.
You should also take into account the surface you want to nail as depending on the material of wood, plasterboard, cement, brick you should choose the corresponding product.
See here all the options on nails.
3. No drilling
If you don't want to damage the wall with holes because you live in a rented house, you're not sure about the location or you don't like to create signs, the solution is a ...
Use self-adhesive fasteners such as support hooks.
Even if the frame or frame you want to use has some weight, you don't have to worry as you can choose
the right product depending on the weight of the object you want to hang.
If you regret the position you gave him, you don't have to worry as most products allow you to reattach them.
See more options here.
Removal is easy and leaves no marks on the wall.
Take out the frame, remove the top and then stretch the tape down until you remove it completely from the wall.